Heat Pump Repair Cost (2026)
Most heat pump repairs run $140–$2,900 AUD depending on the problem, the brand tier, and your local labour costs — in Australian dollars, from Australian sources. Start from the problem, then localize. Reviewed July 2026.
$140–$2,900 AUD across all common heat pump repairs. Pick the problem to narrow it.
| Most common repair | Typical total (AUD) | DIY? |
|---|---|---|
| Reversing-valve solenoid coil replacement on the outdoor unit (system stuck in cooling) | $280–$620 AUD | Pro recommended |
| Full four-way reversing valve body replacement (recover gas, cut out valve, braze in new body, evacuate and recharge) | $620–$1,750 AUD | Pro recommended |
| Outdoor main / control PCB replacement (unit will not call for heat) | $500–$1,400 AUD | Pro recommended |
Plus a typical service-call / diagnostic fee of $80–$300 AUD, often credited toward the repair.
Pick a quality tier for a class-typical estimate. Everything updates without a page reload; no data leaves your browser.
Base: published rates from 3 Australian repair companies (2026-07) · Australia national base range (ABS median employee income) · Reviewed July 2026 · Estimated
How much does heat pump repair cost by problem? Estimated
| Problem | Typical range | Repairs priced |
|---|---|---|
| Not Heating | $280–$1,750 AUD | 3 |
| Not Cooling | $200–$1,400 AUD | 3 |
| Stuck in Defrost / Frozen Outdoor Unit | $180–$1,400 AUD | 3 |
| Reversing Valve Replacement | $280–$1,750 AUD | 2 |
| Defrost Control Board Replacement | $180–$1,400 AUD | 2 |
| Capacitor Replacement | $140–$520 AUD | 2 |
| Refrigerant Leak Repair / Recharge | $280–$2,600 AUD | 3 |
| Compressor Replacement | $1,200–$2,900 AUD | 2 |
| Outdoor Fan Motor Replacement | $400–$1,600 AUD | 2 |
| Short Cycling (Turns On and Off) | $180–$900 AUD | 3 |
Base: published rates from 3 Australian repair companies (2026-07) · Australia national base range (ABS median employee income) · Reviewed July 2026 · Estimated
How do brand & quality tier change the parts cost?
Brand and tier adjust the parts portion only — never labour. Value brands such as Simpson, Chef, Kelvinator, Beko and Hisense have the cheapest, most widely stocked parts; premium and luxury lines (Bosch, Smeg, Asko, Miele) carry pricier, often OEM-restricted components. Pick a tier in the calculator for a class-typical estimate, or a specific Australian brand to override it.
| Brand | Parts factor | Basis |
|---|---|---|
| Basic tier parts ×0.975 | ||
| Coolair | ×1 | Baseline — no parts adjustment |
| Kelvinator | ×0.95 | Parts ×0.95 (Electrolux's Australian value air conditioning brand, sold at volume through mass retail; its spares move through generalist appliance-parts distributors on the shared Electrolux-group catalogue rather than a controlled OEM-only channel, and the control electronics are cheap — genuine Electrolux terminal board PCB (Board Terminal Assy) PN. 4055890208 at A$179.95 (RRP A$189.95) against a Daikin main PCB A$926.86 and MHI boards A$329.73-A$895.00. The discount is modest rather than large because the bigger Kelvinator components are not cheap (brushless motors and electronic control boxes run into the hundreds), so the basket lands only slightly below baseline) |
| Electrolux | ×0.95 | Parts ×0.95 (published rates from 3 local repair companies) |
| Haier | ×0.95 | Parts ×0.95 (Distributed in Australia by Fisher & Paykel Australia and sold as a value split-system line, with GENUINE Haier air-conditioner parts openly traded by part number. The AC control electronics are cheap but not the deepest discount in the set: a genuine Haier air-conditioner outdoor PCB (H0011800209G, HSU-12HEG03) at A$186.95 and a power-module PCB (H0011800052) at A$155.95 bracket Kelvinator's terminal board (A$179.95) and sit far below a Daikin main PCB (A$926.86), so Haier lands at the same value level as Kelvinator, slightly below the mainstream baseline. (Re-anchored on genuine Haier AC parts; the earlier whitegoods-catalogue items, including a water-valve harness, were removed as out-of-scope, and the placement was lifted from 0.90 to 0.95 to match the real AC-board evidence.)) |
| Hisense | ×1 | Baseline — no parts adjustment |
| Gree | ×0.975 | Parts ×0.975 (published rates from 2 local repair companies) |
| Midea | ×1 | Baseline — no parts adjustment |
| Mid-range tier parts ×1 | ||
| Brivis | ×1 | Baseline — no parts adjustment |
| Bonaire | ×1 | Baseline — no parts adjustment |
| Braemar | ×1 | Baseline — no parts adjustment |
| Rinnai | ×1 | Baseline — no parts adjustment |
| Fujitsu General | ×1 | Baseline — no parts adjustment |
| Panasonic | ×1 | Baseline — no parts adjustment |
| Samsung | ×1 | Baseline — no parts adjustment |
| LG | ×0.95 | Parts ×0.95 (High-volume split-system brand whose control electronics are among the cheapest openly traded in Australia — a main control board PCB is listed on its own per-product page at A$85.95 (RRP A$93.95), a fraction of the equivalent Daikin (A$926.86) or ActronAir (A$718.31) board — and a 74,348-item LG-specific catalogue keeps commodity items low (capacitors A$2.35-A$2.63). Mechanical parts are ordinary rather than cheap (outdoor fan propeller A$151.01 against Fujitsu's A$112.65), so the discount is modest) |
| Premium tier parts ×1.1 | ||
| Breezair | ×1 | Baseline — no parts adjustment |
| Daikin | ×1.12 | Parts ×1.12 (Australia's highest-volume reverse-cycle brand but a strictly genuine-parts channel: main PCBs for ducted and multi-head systems are listed at A$926.86 and A$2,069.30, several times the equivalent Mitsubishi Electric inverter PCB (A$178.60-A$426.12) or LG main control board (A$85.95), and the parts storefront actively markets against generic substitutes. High volume and cheap commodity items (indicator PCB A$43.63, discharge grille A$40.26) keep it from climbing further, but boards and inverter parts sit clearly above baseline) |
| Mitsubishi Electric | ×1.05 | Parts ×1.05 (published rates from 2 local repair companies) |
| Mitsubishi Heavy Industries | ×1.1 | Parts ×1.1 (A separate company and separate parts channel from Mitsubishi Electric, and genuinely sold in Australia with published parts pricing: a 154-item MHI-specific catalogue lists control and inverter boards at A$138.39-A$895.00 (outdoor control board main A$329.73, control board A$360.81, PWB assy control A$570.57, PWB assy control A$895.00, sub PWB outdoor A$138.39). That board band sits well above the commodity brands (LG main control board A$85.95) and above Mitsubishi Electric's openly-traded inverter PCBs, but clearly below Daikin's A$926.86-A$2,069.30 mains — a real but moderate premium. (One previously-cited inverter PWB assy part number could not be re-located on the catalogue on re-check and was removed; the A$138.39-A$895.00 board band and the 1.1 placement stand without it.)) |
| ActronAir | ×1.25 | Parts ×1.25 (Australian-designed and largely Australian-built ducted systems with proprietary, model-specific control hardware sold only through the manufacturer's own genuine-parts storefront: residential indoor PCB A$718.31, outdoor control assembly A$911.31, outdoor inverter PCB A$650.56, compressor drive A$1,514.52 and A$1,551.78, and a compressor VSD assembly at A$7,601.97. The storefront itself notes 'PCBs are among the most model-specific parts', which is exactly the substitution-proof condition that holds prices up. Highest parts basket in the Australian residential set) |
| Toshiba | ×1.1 | Parts ×1.1 (published rates from 2 local repair companies) |
| Hitachi | ×1.1 | Parts ×1.1 (published rates from 2 local repair companies) |
| Carrier | ×1.1 | Parts ×1.1 (published rates from 2 local repair companies) |
Heat Pump error codes
When the display shows a fault code, the diagnosis — and the price — gets specific. 134 heat pump codes are decoded in the error-code directory; the most looked-up:
Actron Air E6 (NEO) Actron Air E6 (L-Series) Actron Air E9 (QUE) Actron Air E9 (ESP) Carrier 41-13 Carrier 53-41 Carrier 61-41 Carrier 64-41
How much is a heat pump service-call fee?
Most Australian companies charge a diagnostic / service-call fee of $80–$300 AUD, often credited toward the repair if you proceed.
Base: published rates from 4 Australian repair companies · National fee range · Reviewed July 2026 · Estimated
Is it worth repairing a heat pump?
If the repair quote exceeds roughly half the price of a comparable new heat pump — or the unit is well past its typical service life — replacement is often the better value. Localize the repair range above first, then compare.
Prices are SA4 region-level estimates based on labour-cost data, not fake city precision. See the methodology for the localization method and named sources.
Reviewed by a Red Seal–certified appliance technician who also holds a Technical Safety BC gas ticket (Gas-C) and an ODS/halocarbon refrigerant ticket (CFC/HCFC/HFC).