Lennox · error code

Lennox Furnace 228 Error Code — Meaning & Repair Cost (2026)

Furnace control is unable to calibrate the pressure switch (inducer calibration issue). Below: the most likely causes, and what the matching repair costs — Estimated national ranges with a metro localizer. Reviewed July 2026.

Code228
ApplianceLennox furnace
Brands covered1
ReviewedJuly 2026

What 228 means

Furnace control is unable to calibrate the pressure switch (inducer calibration issue).

Likely causes, most common first

  1. Blocked vent or restricted combustion-air inducer
  2. Blocked cold end heater box or condensate drain
  3. Cracked hoses
  4. Unit not level

Base: 1 published national repair-cost guide (retrieved 2026-07) · full source registry on the methodology page · Code meaning & causes · Reviewed July 2026

What it usually costs to fix Estimated

228 on a Lennox furnace resolves to the gas furnace not heating / blowing cold air problem. Lennox parts typically run ×1.35 against the mainstream baseline (Lennox 'uses proprietary parts that only Lennox dealers can source.' A direct brand comparison found a blower-motor replacement running $2,400-$2,500 installed on Lennox vs $600-$1,200 on Carrier, with Lennox parts needing to be special-ordered direct from the factory (2-4 week wait) versus same-day local-supplier availability for Carrier parts.), and the ranges below already include it.

Repair cost calculator

$80–$840 national estimate to fix the fault behind 228 (Lennox parts ×1.35). Enter a ZIP to localize.

Quality tier (adjusts parts)
National ranges — Lennox furnace not heating / blowing cold air Estimated
Most common repairTypical totalDIY?
Hot-surface igniter replacement (installed) $155–$385 DIY possible
Flame sensor cleaning or replacement $80–$260 DIY possible
Gas valve replacement $330–$840 Pro recommended
Integrated furnace control (IFC) board replacement $320–$805 Pro recommended

Plus a typical service-call / diagnostic fee of $75–$150, often credited toward the repair.

Pick a quality tier for a class-typical estimate, or a specific brand to override it (brand adjusts the parts portion only). Enter a ZIP or Canadian postal code to localize to your metro's labor costs. Everything updates without a page reload; no data leaves your browser except the shard lookup.

Base: 2 published national repair-cost guides (retrieved 2026-07) · full source registry on the methodology page · National base range (BLS OEWS May 2025 + BEA RPP 2024) · Reviewed July 2026 · Estimated

See the full gas furnace not heating / blowing cold air cost guide All error codes

Codes are universal — your location changes the repair price, never the code's meaning. See the methodology for the exact localization formula and sources.

Reviewed by a Red Seal–certified appliance technician who also holds a Technical Safety BC gas ticket (Gas-C) and an ODS/halocarbon refrigerant ticket (CFC/HCFC/HFC).