Orcon HVAC Repair Cost (Netherlands, 2026)
Estimates reviewed July 2026 · appliance-repair figures maintained by a licensed appliance technician.
Orcon HVAC repairs typically run €5–€6,880, depending on the HVAC system, the problem, and your local labour costs. Orcon is a mainstream brand — its parts run pricier than mainstream brands, so the parts side of a repair sits above the class average. Every figure is an Estimated range in euros, never a fake precise number. Reviewed July 2026.
Orcon repair cost by HVAC Estimated
These ranges apply Orcon's parts tier (1.10× the mainstream baseline) to the parts portion only — labour is unchanged and localizes to your area. Tap an HVAC system for its full problem-by-problem breakdown and the localizer.
| HVAC | Estimated Orcon range |
|---|---|
| Orcon gas furnace repair | €95–€5,900 |
| Orcon central air conditioning repair | €60–€1,420 |
| Orcon heat pump repair | €130–€3,725 |
| Orcon ductless mini-split repair | €60–€1,420 |
| Orcon boiler repair | €95–€905 |
| Orcon thermostat & controls repair | €5–€760 |
| Orcon air handler repair | €10–€6,880 |
| Orcon ductwork & vents repair | €5–€3,780 |
| Orcon oil furnace repair | €130–€1,795 |
Base: published rates from 8 Dutch heating, ventilation & cooling companies (2026-07) · Netherlands national base range (CBS StatLine 2024) · Reviewed July 2026 · Estimated
What changes an Orcon repair bill
- Brand tier — Orcon, also known under the names Ubbink and Rucon, makes the ventilation and heat-recovery units many Dutch homes have. The main circuit board for an HRC unit costs EUR 249.00 and the complete fan module EUR 390.00, while the control part from the benchmark brand costs roughly EUR 188. Smaller boards, such as the one for the humidity sensor, are cheap by contrast at EUR 45.98. On average that puts Orcon slightly above the benchmark.
- Parts vs labour — the brand and tier shift the parts price; labour tracks your area's wage index, not the brand.
- The specific fault — a sensor, seal, or valve is far cheaper than a compressor, motor, or control board.
- DIY vs professional — Some Orcon faults (filters, seals, hoses) are DIY-feasible for confident owners; sealed-system and control-board work is a professional job.
Estimated labour-cost-localized ranges — see the methodology for the localization method and named sources.
Reviewed by a Red Seal–certified appliance technician who also holds a Technical Safety BC gas ticket (Gas-C) and an ODS/halocarbon refrigerant ticket (CFC/HCFC/HFC).