Galmet HVAC Repair Cost (Poland, 2026)
Estimates reviewed August 2026 · appliance-repair figures maintained by a licensed appliance technician.
Galmet HVAC repairs typically run 160–27 200 zł, depending on the HVAC system, the problem, and your local labour costs. Galmet is a mainstream brand — its parts are cheaper and widely stocked, keeping the parts side of a repair below the class average. Every figure is an Estimated range in zloty, never a fake precise number. Reviewed August 2026.
Galmet repair cost by HVAC Estimated
These ranges apply Galmet's parts tier (0.90× the mainstream baseline) to the parts portion only — labour is unchanged and localizes to your area. Tap an HVAC system for its full problem-by-problem breakdown and the localizer.
| HVAC | Estimated Galmet range |
|---|---|
| Galmet heat pump repair | 280–27 200 zł |
| Galmet boiler repair | 195–3475 zł |
| Galmet thermostat & controls repair | 160–1760 zł |
Base: published rates from 6 Polish heating & cooling companies (2026-08) · Poland national base range (GUS, average monthly gross wage by voivodeship, 2024) · Reviewed August 2026 · Estimated
What changes a Galmet repair bill
- Brand tier — tier median (0.9 = median of the mainstream-tier brands with directly observed Polish board prices: Bosch 0.85, Immergas 0.85, Beretta 1.0 and Ariston 1.4, whose median of 0.925 is recorded conservatively as 0.9). Galmet is a Polish manufacturer from Glubczyce, the country's largest maker of water heaters, also offering air-source and ground-source heat pumps and tanks. Polish market commentary places it among the solid, economical options alongside the premium names. No Polish shop page with an openly priced Galmet control board was reached, so the brand is anchored on its tier's evidenced median rather than guessed.
- Parts vs labour — the brand and tier shift the parts price; labour tracks your area's wage index, not the brand.
- The specific fault — a sensor, seal, or valve is far cheaper than a compressor, motor, or control board.
- DIY vs professional — Some Galmet faults (filters, seals, hoses) are DIY-feasible for confident owners; sealed-system and control-board work is a professional job.
Estimated labour-cost-localized ranges — see the methodology for the localization method and named sources.
Reviewed by a Red Seal–certified appliance technician who also holds a Technical Safety BC gas ticket (Gas-C) and an ODS/halocarbon refrigerant ticket (CFC/HCFC/HFC).