Air Handler Leaking Water (Drain Pan / Coil) — Repair Cost in Sweden (2026)
Sweden national estimate: 2 800–12 000 kr for a air handler — leaking water (drain pan / coil) — built from Swedish sources, never converted from another country's prices. Pick your quality tier and pick a county to localize. Reviewed August 2026.
Also searched as: “air handler leaking water repair cost”, “air handler drain pan leak fix cost”, “air handler water leak repair price”.
2 800–12 000 kr Sweden national estimate for a air handler — leaking water (drain pan / coil). Localize below.
| Most common repair | Typical total (SEK) | DIY? |
|---|---|---|
| Service visit for condensate water leaking from the unit | 2 800–7 500 kr | Pro recommended |
| Rectifying the condensate drain and trap and checking the unit's fall | 4 500–12 000 kr | Pro recommended |
Plus a typical service-call / diagnostic fee of 450–900 kr, often credited toward the repair.
Pick a quality tier for a class-typical estimate, or a specific Swedish brand to override it (both adjust the parts portion only, never labour). Pick a county (län) to localize to that region's labour costs. All figures stay in kronor, never converted from another country's prices. Everything updates without a page reload.
Base: published rates from 2 Swedish heat-pump and ventilation companies (2026-08) · Sweden national base range (SCB Lönestrukturstatistik 2024) · Reviewed August 2026 · Estimated
How do brand and quality tier change the repair cost?
Brand and tier adjust the parts portion only — never labour. NIBE of Markaryd is the Swedish volume maker of ground-source, air-to-water and exhaust-air heat pumps, and its board prices set the 1.0 reference line every other brand is measured against. Panasonic and Samsung carry the lowest parts prices, followed by Thermia, Värmebaronen and Bosch. Fujitsu and Mitsubishi Electric sit highest, followed by CTC, Daikin and Vaillant, with Toshiba, Mitsubishi Heavy Industries, IVT and LG moderately above the line. On the ventilation side Systemair, Flexit and Östberg sit at the reference level and Swegon above it. ComfortZone and Energy Save have no published Swedish board price and are left at the reference level; EVI Heat, Viessmann and Swegon have none either and are set to the premium band median. The factors below are parts prices relative to the reference line — not a quality, reliability or market-share ranking — and they do not track the price tier: premium-tier Panasonic sits lowest because a split-AC board is a physically smaller item than a hydronic main board. Pick a tier for a class-typical estimate, or a specific Swedish brand to override it.
| Brand | Parts factor | Basis |
|---|---|---|
| Basic tier parts ×0.925 | ||
| Värmebaronen | ×0.85 | Parts ×0.85 (published rates from 1 local repair company) |
| Energy Save | ×1 | Baseline — no parts adjustment |
| Mid-range tier parts ×1 | ||
| NIBE | ×1 | Baseline — no parts adjustment |
| Bosch | ×0.9 | Parts ×0.9 (published rates from 1 local repair company) |
| IVT | ×1.15 | Parts ×1.15 (Three IVT-badged boards observed at SEK 4,017.00 (IOB 6145E IVT 633), 6,758.85 (Nordic Inverter KHR-N indoor) and 7,794.15 (025B. Nordic Inverter 12 LRN-N/PR-N outdoor), median SEK 6,758.85 -- raw ratio 1.16 against SEK 5,807.00, reported conservatively at 1.15 because the basket is only three SKUs. A fourth search hit ('014B. Kretskort PAC-IF011B', SEK 12,491.00) was excluded: PAC-IF011B is a Mitsubishi Electric interface part number, not an IVT-built board.) |
| Thermia | ×0.85 | Parts ×0.85 (published rates from 1 local repair company) |
| CTC | ×1.4 | Parts ×1.4 (published rates from 1 local repair company) |
| ComfortZone | ×1 | Baseline — no parts adjustment |
| Samsung | ×0.8 | Parts ×0.8 (published rates from 1 local repair company) |
| LG | ×1.15 | Parts ×1.15 (published rates from 1 local repair company) |
| Systemair | ×1 | Baseline — no parts adjustment |
| Flexit | ×1 | Baseline — no parts adjustment |
| Östberg | ×1 | Baseline — no parts adjustment |
| Premium tier parts ×1.3 | ||
| EVI Heat | ×1.3 | Parts ×1.3 (tier median (premium band). No publicly priced Swedish parts basket exists for EVI Heat. The premium brands in this guide that do carry observed parts evidence sit at 1.20, 1.30, 1.35, 1.35, 1.45 and 1.45, giving a band median of 1.35, reported one step lower at 1.30 because this brand carries no observed Swedish price at all. EVI Heat is a smaller Swedish maker of ground-source and air-to-water heat pumps, counted among the specialist brands alongside the four volume groups.) |
| Vaillant | ×1.35 | Parts ×1.35 (Two Vaillant boards with Swedish prices: SEK 5,028.00 (VA0020233814, kretskort el-inkoppling 3-fas, VWL ../5 400V air-source heat pump) and SEK 11,122.00 (VA0020150124, huvudkretskort 400V, VWF 5-19/4 flexoTHERM ground-source heat pump), median SEK 8,075.00 -- raw ratio 1.39 against SEK 5,807.00, reported conservatively at 1.35 because the basket is only two SKUs. Both items are heat-pump boards; the page lists no gas-boiler (gaspanna) board at all, so these two prices must never be used to price a Swedish gas-boiler repair.) |
| Viessmann | ×1.3 | Parts ×1.3 (tier median (premium band). No publicly priced Swedish board basket exists for Viessmann. The premium brands in this guide with observed parts evidence sit at 1.20, 1.30, 1.35, 1.35, 1.45 and 1.45 -- band median 1.35, reported one step lower at 1.30 because this brand carries no observed Swedish price at all. Viessmann is a German premium nameplate sold in Sweden mainly as heat pumps and cylinders, and is one of the brands counted outside the four Swedish volume groups.) |
| Mitsubishi Electric | ×1.45 | Parts ×1.45 (published rates from 1 local repair company) |
| Mitsubishi Heavy Industries | ×1.2 | Parts ×1.2 (published rates from 1 local repair company) |
| Daikin | ×1.35 | Parts ×1.35 (published rates from 1 local repair company) |
| Toshiba | ×1.3 | Parts ×1.3 (published rates from 1 local repair company) |
| Fujitsu | ×1.45 | Parts ×1.45 (published rates from 1 local repair company) |
| Panasonic | ×0.8 | Parts ×0.8 (published rates from 2 local repair companies) |
| Swegon | ×1.3 | Parts ×1.3 (tier median (premium band). Swegon is stocked as a spare-parts brand by Swedish ventilation retailers, but no publicly priced Swegon control board is listed. The premium brands in this guide with observed parts evidence sit at 1.20, 1.30, 1.35, 1.35, 1.45 and 1.45 -- band median 1.35, reported one step lower at 1.30 because this brand carries no observed Swedish board price. Swegon is a Swedish maker of air-handling units and chillers whose CASA line covers residential ventilation.) |
Base: Swedish brand parts factors from Swedish parts retailers and repair guides; tier factor = median of the tier's Swedish brands · Applied to the parts portion only · Reviewed August 2026 · Estimated
Air Handler leaking water (drain pan / coil): what usually causes it? Estimated
-
Service visit for condensate water leaking from the unit
Pro recommended2 800–7 500 kr
An FTX unit condenses large amounts of water out of the extract air when it is cold outside, and if water is running onto the utility-room floor or down through the loft floor structure, the condensate drain is blocked or the unit is wrongly fitted. A service visit costs SEK 2,800–7,500 and covers a review of the unit with a function check; a Swedish ventilation firm with a published price list sells the equivalent visit as fixed packages at SEK 2,795–4,995 depending on system type and scope. This is a winter matter in Sweden, and it should not be left: water dripping into the insulation in a cold loft causes moisture damage long before anyone sees the stain in the ceiling.
-
Rectifying the condensate drain and trap and checking the unit's fall
Pro recommended4 500–12 000 kr
The remedy is to flush the condensate drain clean, replace or fill the trap and check that the unit is level with the fall in the right direction. If the fault is a missing or dried-out trap, the unit also draws drain odour into the house, which is a common but overlooked symptom. The job sits inside the repair range that one supplier quotes at SEK 5,000–15,000 after the ROT deduction, that is roughly SEK 6,000–18,000 before the deduction, and in the lower half of that range for a pure drainage job. If the leak is due to a faulty installation, it should be claimed rather than paid for.
Base: published rates from 2 Swedish heat-pump and ventilation companies (2026-08) · Sweden national base range (SCB Lönestrukturstatistik 2024) · Reviewed August 2026 · Estimated
How much is a service-call fee for air handler repair?
Most Swedish companies charge a call-out / diagnostic fee of 450–900 kr, often credited toward the repair if you go ahead. It is separate from the repair totals above. VAT (moms, 25%) may or may not be included: heating, cooling and ventilation work sits on the standard rate, and Sweden's reduced repair rate applies to an enumerated goods list (bicycles, shoes, leather goods, clothing and household linen) that does not reach heat pumps, boilers or ventilation units. Many small firms and sole traders fall under the small-business VAT exemption (turnover under SEK 120,000 per year, since 2025) and charge no VAT — so treat 25% as a ceiling, not a guaranteed add-on. The ROT deduction is not a VAT cut but a tax reduction on the labour cost (30%, up to an annual cap per person), and it never applies to materials, the equipment itself or the call-out fee. Prices here are shown before ROT.
Is it worth repairing a air handler, or should you replace it?
A common rule of thumb: if the repair cost exceeds roughly half the price of a comparable new unit — or the appliance is past ~8 years for a air handler — replacement is often the better value. The calculator's localized totals give you the number to weigh against a new-unit quote.
Prices are county (län)-level estimates based on regional wage data (SCB Lönestrukturstatistik 2024), not fake city precision. Shopping in the U.S.? See the U.S. version (USD). In Canada? See the Canadian version (CAD). See the methodology for the localization method and named sources, or return to the Sweden HVAC repair guide.
Reviewed by a Red Seal–certified appliance technician who also holds a Technical Safety BC gas ticket (Gas-C) and an ODS/halocarbon refrigerant ticket (CFC/HCFC/HFC).